Opticis Optical DVI Extension

BellEquip GmbH
 

OPTICIS

 
M1-P10
Point to Point Hyprid Cable M1-P10

M1-1P0 point-to-point hybrid cable is designed to transmit graphic data over fiber, but interconnect DDC and DC power for the transmitting and receiving modules over copper wires
 
 
M1-201
Fiber-only Detachable Module M1-201-TR

M1-201 fiber detachable module adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data without DDC interconnection.
 
 
M1-2R2VI-DU
Dual Link Detachable Module M1-2R2VI-DU

M1-2R2VI-DU fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as four duplex LC patch cord fibers to transmit Dual DIV signal.
 
 
M1-M1000
Express All-Fiber DVI Cable M1-1000

M1-100 point-to-point fiber cable implements DDC/HDCP interconnection as well as 4 channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology, using 8 fibers cable
 
 
M1-2R2
Fiber/Cooper Detachable Module M1-2R2-TR

M1-2R2-TR fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as two duplex LC patch cord fibers to transmit the graphic data.
 
 
 
 
 
Fiber-optic interconnection of digital graphic data, complying with DVI (Digital Visual Interface) enables data transmission of high-quality and cost effectiveness of integrated display systems. The DVI interface is a industry standard of digital graphic transmission protocol, supervised by DDWG (Digital Display Working Group), supporting TMDS (Transit Minimized Differential Signal) graphic transmission and implementing DDC (Display Data Control) for CPU to identify displays. It also applies for HDCP (High Definition Contents Protection) in DTV system.

Opticis DVI products consist of a transmitter having 850nm VCSEL array inside and a receiver having PIN-Photo Diode array inside. They support UXGA (1,600x1,200) graphic resolution at 60Hz refresh rate.

It can simply extend over the limits of copper wire extension without any distribution amplifier or repeater. In addition, the products could offer a benefit to make electrical separation between graphic sources and display ends.

M1-100 point-to-point fiber cable implements DDC/HDCP interconnection as well as 4 channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology, using 8 fibers cable.
M1-1P0 point-to-point hybrid cable is designed to transmit graphic data over fiber, but interconnect DDC and DC power for the transmitting and receiving modules over copper wires.
M1-201 fiber detachable module adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data without DDC interconnection.
M1-2R2-TR fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as two duplex LC patch cord fibers to transmit the graphic data.
M1-2R2VI-DU fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as four duplex LC patch cord fibers to transmit Dual DIV signal.


It is applicable to
Digital display systems interconnection for medical, military, aero, factory, and
traffic control
Digital FPDs, PDPs and projectors in conference room and auditorium
Kiosk with digital FPDs
Color LED signboards, FPDs and PDPs for information display and stadiums

 




BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 999 • Fax: +43 (0)2822 33 33 995
Mobil: +43 (0)664 33 33 999 • Internet: www.bellequip.at • E-mail: info@bellequip.at

2 Port KVM Switch | 4 Port KVM Switch | 8 Port KVM Switch | 16 Port KVM Switch | USB KVM Switch | DVI KVM Switch | MulitUser KVM Switch | LCD Console KVM Switch | IP based KVM Switch | KVM Console Extender | KVM Converter / Emulatoren | Video Switch | Video Splitter | DVI Video Splitter | Video Extender | CS-62A | CS-62B | CS-62U | CS-64U | CS-88A | CS-142 | CS-521 | CS-522 | CS-1004 | CS-1008 | CS-1016 | CS-1708 | CS-1716 | CS-1732a | CS-1734a | CS-1754 | CS-1758 | CS-1762 | CS-1764 | CS-1772 | CS-1774 | CS-9134 | CS-9138 | CL-1200 | CL-1208 | CL-1216 | CL-1758 | ACS-1208A | ACS-1216A | ACS-1208AL | ACS-1216AL | CN-5000 | CN-6000 | CE-220 | CE-250 | CE-252L/R | CE-300 | CE-700 | VE-150 | VS-102 | VS-261 | VS-461 | VS-132 | VS-491 | VS-162 | VS-164 | VS-0116 | SXP-320A | SXP-325A | SXP-500 | Aten KVM Switches